MTH – TZ and her friends for manual trading all TF

[maahome]

Hi Kiads,

 

I have a question on TV indicator settings. I have tried both alert settings 1 and 0 but they seem to be the same for me when I test. If 0 is current candle, does this mean the marker is read at the open of the following candle or the open of the candle 2 further? the indicator marker appears 2 candles back from the current candle, am I understanding this correctly? If we call the candle with the marker bar 1 then bar 2 has to close to make the marker appear if we use current  candle setting (0) if we use setting 1 then bar 3 has to close for marker to appear? Am I correct?

 

Thank you

maahome

[MTH2014]

MTH2014 wrote:

Thank You for all nice comments, Now, EU level to watch 1.2485 , timing until London Close.. Best Regards MTH

 

Done…

Intuition, Experiences and Common sense..
http://www.binaryoptionsedge.com/

[MTH2014]

maahome wrote:

Hi Kiads, I have a question on TV indicator settings. I have tried both alert settings 1 and 0 but they seem to be the same for me when I test. If 0 is current candle, does this mean the marker is read at the open of the following candle or the open of the candle 2 further? the indicator marker appears 2 candles back from the current candle, am I understanding this correctly? If we call the candle with the marker bar 1 then bar 2 has to close to make the marker appear if we use current candle setting (0) if we use setting 1 then bar 3 has to close for marker to appear? Am I correct? Thank you maahome

 

My Brother,

The ‘alarm’ part is still not as good as ‘Skull and Star’.  And Yes, Hi/Lo marker for this TVI is ‘lag’ for 2 candles,  and that is intended to do like that.., later if I’m done with ‘set up’ for you  (because you’re longer term trader, then I create for H4 and D1)…  you will understand  why we need that ‘lag’.

Happy Trading and Best Regards

MTH

 

 

Intuition, Experiences and Common sense..
http://www.binaryoptionsedge.com/

[jacky]

Hi mates,

If we are looking at  ForexGT_Tick Volume indicator, there are 2 colors (blue and red) of the indicator.  From Data window we can see that it just use 1 buffer.

Is it possible for us to get the information based on its color ?  So to say, we are trying to “split” it into 2 different buffers ….

Thanks

[MTH2014]

jacky wrote:

Hi mates, If we are looking at ForexGT_Tick Volume indicator, there are 2 colors (blue and red) of the indicator. From Data window we can see that it just use 1 buffer. Is it possible for us to get the information based on its color ? So to say, we are trying to “split” it into 2 different buffers …. Thanks

Hi Brother,

Actually ForexGT_Tick Volume from GG53 use 6 buffers, but yes value that show at data window only one..,  if you open the setting and go to Colors Tab, you will see that there was 5 buffers from 0 to 4, and in ‘her’ calculation use 1 extra buffer to store bias/current trend direction.

If you want to ‘call’ this buffers with iCustom, just look the number in colors tab as reference..

Hope it help and best regards

MTH

 

Intuition, Experiences and Common sense..
http://www.binaryoptionsedge.com/

[jacky]

MTH2014 wrote:

Hi Brother, Actually ForexGT_Tick Volume from GG53 use 6 buffers, but yes value that show at data window only one.., if you open the setting and go to Colors Tab, you will see that there was 5 buffers from 0 to 4, and in ‘her’ calculation use 1 extra buffer to store bias/current trend direction. If you want to ‘call’ this buffers with iCustom, just look the number in colors tab as reference.. Hope it help and best regards MTH

Wow, great.  Thank you very much Brother …

[gg53]

Is there any chance of getting your Renko bars to support Volume? Or MQ4 version so I can add it myself?

G.

 

 

[MTH2014]

gg53 wrote:

Is there any chance of getting your Renko bars to support Volume? Or MQ4 version so I can add it myself?
G.

From coder to senior coder done, waiting for your great suggestions to make ‘her’ better for all of us..
MTH

Intuition, Experiences and Common sense..
http://www.binaryoptionsedge.com/

[MTH2014]

For all of my Brothers and Sisters,
please forgive me, ATM I can’t help personal requests to modified any indicators.. there’s still around 24 projects to be done…lol ..
Hope you understand and best regards
MTH

Intuition, Experiences and Common sense..
http://www.binaryoptionsedge.com/

[aryafx]

24 projects simultaneously!!!!???? superman coming back!!!

[MTH2014]

Lol.. It’s Friday and it’s flat.. so be careful guys..
EURUSD level to watch 1.2260
MTH

Intuition, Experiences and Common sense..
http://www.binaryoptionsedge.com/

[MTH2014]

MTH2014 wrote:

Lol.. It’s Friday and it’s flat.. so be careful guys.. EURUSD level to watch 1.2260 MTH

 

Lol.. Done..  I love Friday… hehehe..

MTH

 

Intuition, Experiences and Common sense..
http://www.binaryoptionsedge.com/

[MTH2014]

EURUSD 1.2300 is Strong Supply Areas..   ‘she’ wiil try to break it until next week.. and try to reach 1.2350 level..

MTH

 

Intuition, Experiences and Common sense..
http://www.binaryoptionsedge.com/

[MTH2014]

MTH2014 wrote:

EURUSD 1.2300 is Strong Supply Areas.. ‘she’ wiil try to break it until next week.. and try to reach 1.2350 level.. MTH

 

Done Again..lol, ‘she’ don’t want to wait until next week.. hehehehe..

MTH

 

Intuition, Experiences and Common sense..
http://www.binaryoptionsedge.com/

[damdamda]

Wow kiads 24 projects, thats so much…you are really busy

[damdamda]

This reply has been reported for inappropriate content.

After she reach to 2300 it go rally down,  how did you determined that was a strong supply area kiad? i know it was a supply area but how to know its strong…Have a nice WE

[MTH2014]

damdamda wrote:

After she reach to 2300 it go rally down, how did you determined that was a strong supply area kiad? i know it was a supply area but how to know its strong…Have a nice WE

Hi My Brother,

When I’m boring with all indicators. I just play naked chart with horizontal levels.. , and in my personal opinion, beside that dynamic supply/demand areas,  we can also called fixed levels as supply/demand areas including that round numbers levels..

For me, I don’t believe there’s so many supports and resistances  areas in lower TF,  as their name states,  S/R is government authorities domain to support or to resist, or simply ‘no trespassing’ areas.  So, if S/R break then definitely they not S/R but only Supply or Demand Areas..

If You don’t have it yet, you can try my SweetSpot indicator in attachment here..

Use 5 digit broker, and upload ‘her’ to your EURUSD chart  (any TF but easy to look at H1).

Set StartPrice to 1.25626  . Set SweetSpot Main Level to 500 (50 point), and Set sublevel to 125 (12.5 point). the rest is up to you for color or type of horiz level lines..

You will see, why 1.2300 is important areas since yesterday..

Hope it help and best regards

MTH

 

 

Attachments:

You must be logged in to view attached files.

Intuition, Experiences and Common sense..
http://www.binaryoptionsedge.com/

[maahome]

Hi Kiads,

I liked your call on the EURUSD at 1.2300. If anyone took the time to notice, there were several indications that this was a strong rejection zone. If you look at the SS indi on a 1hr chart there are a number of down skull indications at that level, that is a clue right there to start with. Also we have a bottom area building at the same time so the market is forming a point of control at the 1.2260-1.2300 price area. Each time price touched this top edge of the zone  it was rejected. We can see pressure is building until at last the demand had dried up and the sellers take control to push it through the bottom edge with strength  and most likely market makers have removed liquidity as well at the same time and then if you “look left” you will see empty space….

On a rebound I am expecting to see sellside supply at 1.2240, 1.2265 and again at 1.2310-20 (sorry for no 5th digit people) and that is probably the level you can see the big boys playing at. If you go to a 4hr chart you will again see a strong rejection at at 1.2300 level where price has rotated away from it with speed. Lastly, looking at a daily chart you will see a bottom edge at 1.2310-20 area that was again broken with strong selling.

 

Take care and happy trading guys

maahome

 

 

• This reply was modified 11 years, 5 months ago by maahome.

Attachments:

You must be logged in to view attached files.

[damdamda]

MTH2014 wrote:

 

Hi My Brother, When I’m boring with all indicators. I just play naked chart with horizontal levels.. , and in my personal opinion, beside that dynamic supply/demand areas, we can also called fixed levels as supply/demand areas including that round numbers levels.. For me, I don’t believe there’s so many supports and resistances areas in lower TF, as their name states, S/R is government authorities domain to support or to resist, or simply ‘no trespassing’ areas.

Thank you very much kiads, now i understand. I was bored too about indis that only look at chart with lines, i gotta play with some indies.  Have a great weekend kiad.

[sharker]

I thought Star and Sculls are better to be used on bigger timeframes (H4+), but after maahome last chart I start thinking that H1 is also not bad.. at least when looking back.

[maahome]

Hi sharker,

I really only trade off 4hr and daily charts but I often drill down to lower time frames to see if there is something else “talking” to me. In this instance there was a definite area showing at that point in time and I just wanted to post to confirm that Kiads reading was so spot on. I was ready to go short on the 4h candle and just happened to look at the 1h and it simply confirmed the trade for me. Took some pips and reentered again later.

All the best

maahome

[lasta]

To the great Mr.Kiads

Thank you a lot of always useful information .
Update of this thread is fun every day .

Let one question .

Mr.GekkoJr92 is used in post ＃1067

Indicator of “! MTH b700+ SubSeq 13th Next Star” , how can I get ?

Your indicator of “! MTH b700+ PSS Friday the 13th Indi v.1.0” but I have , what another thing with this ?

Thank you for your answer .

• This reply was modified 11 years, 5 months ago by lasta.
• This reply was modified 11 years, 5 months ago by lasta.

[aryafx]

Dear Kiads
i must thank you again for all generosity and humanism!
i am very interested to your mind about depending between SS and support demand zone and perhaps TZ with frequency of price curve. i saw a picture in ff that i dont remember whether it was by you or other friend.anyway do you think maybe we could find a cycle time (wave length) for each pair currency to help us to see the light for model of future moving of price?

Attachments:

You must be logged in to view attached files.

[smallcat]

aryafx wrote:

Dear Kiads i must thank you again for all generosity and humanism! i am very interested to your mind about depending between SS and support demand zone and perhaps TZ with frequency of price curve. i saw a picture in ff that i dont remember whether it was by you or other friend.anyway do you think maybe we could find a cycle time (wave length) for each pair currency to help us to see the light for model of future moving of price?

Ou yes, i remember this image. Want to ask bro Kiads last time at FF, but forget. So, +1 to the question …
I see the bottom price is at number two (#2) , the swing point. But the center of the circle is not at that point, but between point #2  and #3.
I assume we must define where exactly the center of the circle, to get how far the price will be …
How to define this center point of the circle ?

Thanks a lot in advance my friend.

[gg53]

Watch out for for those SweetSpots !!

Those are known areas for traders to wait for breakout.

The problem is that others know this also, and will use it against you – and it’s not the brokers. they will push the price up for small “fake” breakout, and than drops it by 50-60-70 pips to gather retailers StopLoss.

After that the price will really breakout….

All the red lines in the attached are round numbers SweetSpots….

G.

Attachments:

You must be logged in to view attached files.

[Author]

Posts