[GekkoJr92]

I will

First now I can start playing with the S&S indi. So far it looks awesome

[GekkoJr92]

Hello again friends,

I think something went wrong when dragging the speak_B6.dll into the Libaries folder in MQL4 back then. You clearly said it in the e-mail and I was so certain I did it… but found out it wasn’t there… I’m an idiot

I’m so sorry, Zelo and specially you Kiads for having occupied with my own dumb mistakes… so sorry – bit time my bad. But now it works! See as attached.

Again, thanks for you generosity and great helpfullnes and hopes you are not too annoyed by my stupidity – haha

Attachments:

You must be logged in to view attached files.

[GekkoJr92]

The vertical yellow line indicates when I have attached the indicator. And you can see that I’ve attached it at 20:59:28 and it show the messages at 21:02:11 which seem to be equal to the 3 bars after the vertical line and you clearly sees that it have stoped working

[GekkoJr92]

Hello Zelo,

Good to hear from you

Believe me – this it not the case. Would have wished that I was that silly.

Attached you can see that I have allowed it. And I have not opened the Indi list and Changed it cuz I did it when attaching the indicator

And I guess I followed the instructions if you are refering to this:

PairName= “current pair”;
you can leave it as default if you just use ‘her’ to current chart, or you can type in your pair name, if you want to ‘reference’ other pairs into your current chart

OHLC_Prob_TF= 0;
leave it 0 for current TF, or type in your ‘reference’ TF (higher TF).

Maxbar= 480;
This is limiter bars for Skull and Star to show up, count from current bars. type 0 if you want Skull and Star to show up in your whole current chart.
//———————————— ——————————-+
text1= “=== Probability Sub Sequencer setting===”;

IndicatorID= “SSNS_F13”;
this is indicator ID in case you use 2 instance of S&S Indicator in same chart, you should create different ID for each of them.

SkullShift_Pct= 5;
this is ‘shifting’ up/down position of skull in percent (counting from the range of High to Low)

StarShift_Pct= 20;
this is ‘shifting’ up/down position of star in percent (counting from the range of High to Low)

BarStep= 13;
leave this as default (this is for sub sequencer step)

SectionMode= false;
default ‘false’ for arrow (Skull and Star), if you change to ‘true’ the Skull and Star will change to ‘channel’ like lines.

ShowNextStar= true;
to activated ‘star’ signal, default active

ShowContinuesNextStar= false;
If you set to ‘true’ the ‘1st’ star signal, will follow with ‘2nd’ or ‘3rd’ star if conditions met.

NextStarSize= 0;
UpNextStarColor= clrChartreuse;

DnNextStarColor= clrLightPink;
NextStarUpCode= 171;
NextStarDnCode= 171;
size, color, and code for star signal

ShowSkull= true;
to activate ‘skull signal’ default active

RarestSkull= false;
if you set to ‘true’ it will show only the ‘rarest’ Skull conditions. that usually 100% probability for current candle to follow the skull signal.

SkullSize= 0;
UpSkullColor= clrSpringGreen;
DnSkullColor= clrHotPink;
UpSkullCode= 78;
DnSkullCode= 78;
size, color, and code for skull signal
//———————————— ——————————-+
Show_Line= true;
to show horizontal line from skull signal

Show_Line_in_Background= true;
to set horizontal line behind candles

Show_Validation= false;
let it default

UpSkull_LineColor= clrDeepPink;
UpSkull_LineWidth= 0;
UpSkull_LineStyle= 0;
DnSkull_LineColor= clrLime;
DnSkull_LineWidth= 0;
DnSkull_LineStyle= 0;
horizontal line, size, color and style.

Show_Stat = false;
X_axis = 5;
Y_axis = 105;
Y_step = 15;
TextColor = clrYellow;
ResultColor = clrLime;
upBiasColor = clrLime;
dnBiasColor = clrHotPink;
dfBiasColor = clrAquamarine;
stat setting, position, and color

DoAutoRefresh = false;
let the default ‘false’, if you set to ‘true’ your history will refresh in frequency according to SecondTick setting. It’s not so necessary to use it

SecondTick = 5; // Period in seconds
this is important option, the default is ‘refresh’ calculation for ‘star’ every 5 second.
if DoAutoRefresh = false, this will only ‘redraw’ your chart without refresh your history /synchronized with your broker server.

//———————————— ——————————-+
alertsOn = true;
to activate alert system

SkullAlertOnCurrent = true;
alert voice and message for ‘skull’ will show up for current candle.

StarAlertsOnCurrent = false;
let the default as ‘false’ since for ‘star’ signal will show up in previous candle. but alert voice and message will show up in current candle.

alertsMessage = false;
set to ‘true’ if you need pop up message box

alertsSound = true;
to activate your ‘voice’ alert. default activated.

Note1 = “Speech Setting”;

AlertText = ” “;
you can fill your own text here like ‘attention’, ‘hello’ , ‘Oh My God’ whatever lol…,

BrokerNameText = ” “;
you can fill your broker name here if you use more than 1 MT4 from different broker at same time, so you can recognize from which MT4 the voice came from.

Currency1Text = ” “;
this is for your first currency name; for example AUDUSD you can type in ‘Aussie Dollar’ here.

Currency2Text = ” “;
and you can type in ‘US Dollar’ here.

ChartStyleText = ” “;
if you use alternative chart like renko or constant bar you can type in your chart type here like ‘Constant Bar’,

alertsEmail = false;
send the signal message to your e-mail address.

From Note1 and down is the only inputs I’ve leaved unwritten.

Attachments:

You must be logged in to view attached files.

[GekkoJr92]

Hello all,

Good to see so many here!

I recently wrote to Kiads since I’m having some problems with his SS-indicator. And he urged me to write here so all could se my problems – in order to prevent future problems from others – I guess. It could also be me who are missing the hole idea about the indicator

So to my problems. It’s like it don’t want to refresh and need to be reattached in order to see last Stars and Skulls (and I have the new version). So I never seen a Star in development which I could predict the direction of the next candle with… In addiction to this it rarely comes up with the same on the history when attached. But Kiads told be that it runs about 800 coding lines… so this takes time and therefore one should not have it running on too much charts and too many TF’s Kiads also told me that I could change the SecondTick so it calculated faster…

So in all I’m having trouble with attaching the indi as it don’t always want to show… and that when attached it only shows the stars and skulls to that point when it is attached and thus don’t want to predict the future

Hope Kiads or others can help me. It might also be my own fault as the idea perhaps isn’t to find stars and skulls ind development… but I think my probs is some kind of wierd.

Below I have attached some pictures and also with the Expert folder

Again… So GOOD to se many of the great contributers here

Attachments:

You must be logged in to view attached files.

[Author]

Posts